The basin was developed by brilliant aquarium built. The glass is bulge-glued and has a security sense seam. It is clear glass at the front and side windows.
Currently 145kg river sand are in the pelvis. The grain size is 0.2-0.8 mm.
Water Goblet (cryptocoryne aponogetifolia)
Special features of the facility:
It was used a Back to Nature slim-line rear wall.
Further, 9 modules of Back to Nature as a stone substitute, glued both on the slim-line, as well as on the bottom disc. The high module on the bottom disk is completely durchschwimmbar from behind. Visible from the sides, as well as from the front is the "stone". Cleaning is not a problem from above. Behind the right Valisnerienwald is an H-module, which originally was open to the rear. This was filled with large stones (because of their arrangement is not possible to overturn) and the gaps were filled with sand. This created a kind of plateau behind the module. Thus, no fish swimming in the module and accumulate in this dirt.
T5 light beam 2 x 54 and 2 x 54 Watt dimmable. 245cm 2 flames.
Are used: 2 x 54 Watt Dennerle ColorPlus 2 x 54 Watt Dennerle Amazon Day
Current maturities: 08:45 - 09:15 clock dimming from 0% to 20% 21:45 - 22:15 clock dim from 20% to 0%
The filtering is done via a so-called Profiline filter of brilliant Aquarium. To this end, an overflow chute is installed on the left side in the basin, through which the water in the left hand in the cabinet filter tank (dimensions: 120 x 47 x 45) passes. This is a 4-chamber biofilter. There are filter sponges and 7 liter Eheim substrate per the pelvis. When a pump is used EHEIM compact + 5000th Technical specifications : Capacity: 2500-5000 l / h. Delivery head: 3.0 m Hmax Power Consumption: 78 W
Aquarium computer: ProfiLux Plus II Features overview:
- 8-channel illumination control for dimmable and non-dimmable lamps, herewith up to 8 lamps can be set separately - Sunrise and sunset - Moon phase simulation, calendar-calculated - Cloud simulation by random, storm simulation - Programmable rainy days - Feed pause for pumps - Control of variable current pumps (ebb / tide and wave simulation) - Operating hour meter for lamps - Burn-in mode for fluorescent tubes - Battery-buffered real-time clock - PC interface, LAN and WLAN option, operation with free Windows ™ software ProfiLuxControl II possible - Connection option for external display - Display of reminder texts (eg "Filter change!") - Control of up to 24 switch sockets - 8 programmable timers - 8-channel Dosierpumpensansteuerung - Child protection via PIN-code - Simple and intuitive operation, all settings in the form made interactive dialogs - Settings are protected against power failure in non-volatile memory (EEPROM) - Computer is expandable with 3 additional modules - Connection option for radio-controlled clock (DCF) - Several aquarium computers can be networked - It has the functions as ProfiLux II - Also provides: control of pH over CO2 supply (down rules) or made alkaline (up regulate), programmable night switch-off - Temperature sequence control for heater, bottom heater and cooling, programmable Night mode, variable speed fan controlled - Alarm function, output of alarm optical, acoustic and switch socket - Hour meter for all sensors - Therapy program for sick fish - With expansion cards ORP, Conductivity and oxygen values can be measured and regulated. - Connection option for level sensors - Automatic calibration of all sensors - Data acquisition - Temperature sensor included in delivery
I'll presently control the lighting, the pump and the temperature.